CVE-2026-16148Medium· 4.6▾ SunlitThe ITE it82xx2 USB device-controller driver initialized its bus-suspend detection work with k_work_init_delayable(&priv->suspended_work, suspended_handler) inside it82xx2_enable() (the driver's .enable op) in drivers/usb/udc/udc_it82xx2…
▾ Sunlit zone — Low / medium · no exploitation signal
impact 25.3 · likelihood 0 · exploitation 0
Need a working PoC? Pro members can cast a request and our team develops one — it lands right here.
Stakeholder-Specific Vulnerability Categorization from CISA's ADP record at CVE.org: whether exploitation is observed, whether an attack can be automated, and how much of the system is at stake.
Exploit-prediction probability, daily snapshots since Sep 15.
Disclosure to exploitation, from the record and what we observed since indexing it.
Disclosed via NVD
0.2%
The ITE it82xx2 USB device-controller driver initialized its bus-suspend detection work with k_work_init_delayable(&priv->suspended_work, suspended_handler) inside it82xx2_enable() (the driver's .enable op) in drivers/usb/udc/udc_it82xx2.c. This work item is scheduled essentially continuously while the USB bus is active: the interrupt handler reschedules it on every SOF frame and suspended_handler() reschedules itself, so its timeout node is normally linked in the kernel timeout list / a workqueue pending queue.
k_work_init_delayable() (kernel/work.c) unconditionally overwrites the entire k_work_delayable structure, including its timeout and queue linkage, with no busy check. Because it82xx2_disable() does not cancel the work, a normal disable-then-enable cycle re-runs api->enable() (udc_enable() only rejects a redundant enable, not a re-enable after disable) and re-initializes the still-pending work in place, corrupting the kernel timeout/workqueue linked lists and causing a kernel panic.
An external USB host — for example a host performing USB DFU detach (dfu-util --detach) or forcing repeated attach/reset/re-enumeration — drives the udc_disable()/udc_enable() transitions and controls suspend/resume timing, so it can arrange for the suspend work to be pending across a re-enable. This yields an unauthenticated denial of service (kernel panic) reachable across the USB boundary from a removable, physically-connected host, with no confidentiality or integrity impact demonstrated.
The fix moves the k_work_init_delayable() call into the one-time preinit function so the work is initialized exactly once, eliminating the re-initialization of an in-use item.
Refer to the linked advisories for vendor-supplied fixes and affected version ranges.
Connected by shared product, vendor, weakness, or advisory.
CVE-2026-15460Medium· 5.4Missing channel-state validation in Zephyr Bluetooth Classic L2CAP receive path
CVE-2026-17052High· 7.8Missing user-pointer validation in tgpio_pin_read_ts_ec syscall handler allows arbitrary supervisor-memory write from userspace
CVE-2026-17050Medium· 5.7The experimental USB host stack allocates a per-device configuration-descriptor buffer, udev->cfg_desc, from the dedicated usb_device_heap in usbh_device_set_configuration() (subsys/usb/host/usbh_device.c)
CVE-2026-17051Medium· 6.0The Intel SEDI IPM (inter-processor mailbox) driver in drivers/ipm/ipm_sedi.c handles an inbound message interrupt in ipm_event_dispose()
CVE-2026-16512Low· 3.1gptp_handle_msg() in subsys/net/l2/ethernet/gptp/gptp.c dereferenced the gPTP header returned by GPTP_HDR() and switched on hdr->message_type without first checking that the received frame carries at least sizeof(struct gptp_hdr) (34) by…
CVE-2026-16514Medium· 4.3gptp_mi_qualify_announce() in subsys/net/l2/ethernet/gptp/gptp_mi.c walks the Path Trace TLV of a received IEEE 802.1AS Announce message, comparing each clock identity against the local one