CVE-2026-10642Medium· 6.5▾ SunlitThe Zephyr PL011 UART driver (drivers/serial/uart_pl011.c) contains an unbounded software loop in pl011_irq_tx_enable() that repeatedly invokes the interrupt-driven application callback while the TX interrupt mask bit (PL011_IMSC_TXIM) i…
▾ Sunlit zone — Low / medium · no exploitation signal
impact 35.8 · likelihood 0 · exploitation 0
Need a working PoC? Pro members can cast a request and our team develops one — it lands right here.
Exploit-prediction probability, daily snapshots since Jul 4.
Disclosure to exploitation, from the record and what we observed since indexing it.
Disclosed via NVD
Last analysed / modified upstream
0.2%
0.2% → 0.2%
The Zephyr PL011 UART driver (drivers/serial/uart_pl011.c) contains an unbounded software loop in pl011_irq_tx_enable() that repeatedly invokes the interrupt-driven application callback while the TX interrupt mask bit (PL011_IMSC_TXIM) is set, to work around the controller's level-transition TX-interrupt behavior. When CTS hardware flow control is enabled (devicetree hw-flow-control or runtime UART_CFG_FLOW_CTRL_RTS_CTS) and the wired serial peer de-asserts CTS, the controller stops draining the TX FIFO; pl011_fifo_fill() then returns 0 on every call while the application still has pending data and therefore never disables the TX interrupt. The loop condition never clears, so the thread that called uart_irq_tx_enable() (e.g. h4_send() in the Bluetooth HCI H4 driver) spins indefinitely, hanging the executing context and stalling the transport — a denial of service (CWE-835). An attacker controlling the device attached to the UART's CTS line can trigger the hang by withholding CTS during transmission. Impact is availability only; there is no memory-safety, confidentiality, or integrity consequence. The vulnerable loop was introduced in commit b783bc8448ef (Feb 2025) and shipped in releases v4.1.0 through v4.4.0. The fix breaks out of the loop when CTS is blocking and arms the CTS modem-status interrupt to resume transmission when CTS re-asserts.
zephyr >= 4.1.0, < 4.5.0Upgrade past the affected range:
zephyr 4.5.0Connected by shared product, vendor, weakness, or advisory.
CVE-2026-15923Medium· 4.6The Zephyr SDIO subsystem function sdio_io_rw_extended_helper() in subsys/sd/sdio.c finishes transfers with a byte-I/O loop that uses size = MIN(remaining, func->cis.max_blk_size) as the per-iteration step
CVE-2026-10686Medium· 5.8Zephyr's IPv6 forwarding path re-sent routed unicast packets without ever decrementing the IPv6 hop limit
CVE-2026-15890Medium· 5.3The default AEAD nonce provider for the PSA Internal Trusted Storage transform module, secure_storage_its_transform_aead_get_nonce() in subsys/secure_storage/src/its/transform/aead_get.c, stores its nonce counter in unsynchronized functi…
CVE-2026-17054Medium· 5.3The Espressif ESP-hosted Wi-Fi driver (drivers/wifi/esp_hosted/) parses frames received over SPI from the ESP co-processor in esp_hosted_event_task()
CVE-2026-17052High· 7.8The Time-aware GPIO syscall verification handler z_vrfy_tgpio_pin_read_ts_ec() in drivers/timeaware_gpio/timeaware_gpio_handlers.c validated only the port device object and passed the caller-supplied timestamp and event_count output poin…
CVE-2026-17050Medium· 5.7The experimental USB host stack allocates a per-device configuration-descriptor buffer, udev->cfg_desc, from the dedicated usb_device_heap in usbh_device_set_configuration() (subsys/usb/host/usbh_device.c)